AFRISO AG 11 Betriebsanleitung Seite 58

9 Troubleshooting
Any malfunctions that cannot be removed by means of the measures
described in this chapter may only be repaired by qualified persons.
Problem
Green LED is not on
The red LED flashes
and the audible alarm
sounds
Red LED is off and the
audible alarm does not
sound, even though the
signal transmitter has
switched
Other malfunctions
Troubleshooting
Possible reason
No supply voltage
Mains fuse defective
(AG 11)
Flat cable not
connected to printed cir-
cuit board
Signal transmitter has
switched
Line interruption
Product defective
-
Repair
Apply supply voltage
Replace the mains fuse
Connect the flat cable to
the printed circuit board
Notify a specialised
company
Check the cable
Contact the AFRISO
service hotline
Contact the AFRISO
service hotline
AG 11 / AG 12
EN
26