4
Product description
AG 11
If the contact of a connected signal transmitter is opened, the product triggers
visual and audible alarms.
In the case of an alarm, the voltage-free changeover contact is switched.
The product can be operated in two operating modes:
•
Operating mode Eco
- The product is factory-set to the operating mode "Eco".
If no alarm is present, the relay is de-energised. In case of an alarm, the
relay is energised.
•
Operating mode Failsafe
- You can also operate the product in the operating mode "FailSafe" (see
"Setting the operating mode (AG 11 only)").
If no alarm is present, the relay is energised. In case of an alarm, the
relay is de-energised.
AG 12
If the contact of a connected signal transmitter is closed, the product triggers
visual and audible alarms.
In the case of an alarm, the voltage-free changeover contacts are switched.
AG 11
Fig. 1: Connection of the signal transmitter to the alarm units AG 11 and AG 12
Product description
AG 12
AG 11 / AG 12
EN
6