Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Touch the button Pause function, the cooking zone indicator will show "ll".
And then the operation of the induction cooktop will be deactivate within the scope
of all cooking zones, except the Pause, on/off and lock keys.
3. To cancel the pause status, touch the Pause function, then the cooking zone
will go back to the power stage which you set before.
Flex Zone
•
This area can be used as a single zone or as two different zones, accordingly to
the cooking needs anytime.
•
Flexible area is made of two independent inductors that can becontrolled
separately.
•
Important: Make sure to place the cookwares centered on the single cooking
zone. In case of big pot, oval, rectangular and elongated pans make sure to place
the pans centered on the cooking zone covering both cross.
Examples for good and bad pot placements:
As big zone
1.
Touch the slider of the heating zone (left side) that you wish to go into
flexizone, then touch the flex zone selection button to activate the flexible
area as a single big zone, the indicator next key will be on.
EN-17
2.
Touch the slide along the "
—
" control, or just touch any point of the "
adjust the power
level.
As two independent zones
1. If you want to cancel the
flex zone, touch the slider of the heating zone again,
then touch the flex zone selection button, the indicator next to the flex zone
button will disappear.
Locking the
Controls
•
You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show " Lo ".
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for 3 seconds.
3. You can now start using your Induction hob.
When
the
hob
is
in
the
lock
you
can
always
turn
the
induction
but you shall unlock the hob first in the next operation.
Over
-
Temperature Protection
A
temperature
sensor
equipped
can
hob. When an excessive temperature is monitored, the
operation
automatically.
Over
-
spillage Protection
Over
-
spillage protection is a safety protection function. It switch off the hob
automatically within 10s if the water flow to the control panel, while buzzer will
on).
mode,
all
the
controls
are
disable
except
hob
off
with
the
ON/OFF
control
in
monitor
the
temperature
inside
the
Induction hob will stop
EN
-
18
—
" to
,
the
ON/OFF
an
emergency,
Induction
Werbung
Inhaltsverzeichnis
