Setting Up The Docking Station In The Center Of The Mowing Area - Stihl iMOW 6.0 EVO Gebrauchsanleitung

English
► Route the perimeter wire (1) clockwise around
the mowing area,
If the docking station has been positioned partly
in a navigable area and partly in the mowing
area:
► Route the perimeter wire (1) away from the
base plate (3) toward the side and along the
navigable area.
► Route the perimeter wire (1) clockwise around
the mowing area,
7.5 Setting up the docking station
outside the mowing area
1
► Install the perimeter wire (1) in the base plate
so that the guide wire lies flat in the cable duct
and is secured by the hook (2).
► Attach the perimeter wire (1) directly on the
base plate (3) with a fixing pin (4).
66
8.
1
3
8.
2
4
3 1
7 Positioning the docking station
► Route the perimeter wire (1) toward the front
to the mowing area.
The correct distance to the edge of the mow‐
ing area depends on whether the edge of the
mowing area is navigable, or a distance of
a = 37 cm (length: 1x iMOW
be maintained.
► Route the perimeter wire (1) clockwise around
the mowing area,
7.6 Setting up the docking station
in the center of the mowing
area
1
2
► Install the perimeter wire (1) in the base plate
so that the guide wire lies flat in the cable duct
and is secured by the hook (2).
4
► Attach the perimeter wire (1) directly on the
base plate (3) with a fixing pin (4).
a
1
®
Ruler) needs to
8.
1
3
0458-012-9601-A