Technical Data - fors TP860-2 Benutzerinformation

Problem
The display shows
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.

TECHNICAL DATA

Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Total power
Energy efficiency class
Energy consumption on the standard cotton
programme with the full load.
Possible solution
Ensure that the room temperature is higher
than +5°C and lower than +35°C. Optimal
room temperature is 18°C to 25°C.
Set the Zeitprogramm (Time Drying or the
Extratrocken (Extra Dry) programme.
If you want to set a new programme, deacti‐
.
vate and activate the appliance.
Make sure that the options are suitable for
the programme.
• Incorrect setting of the conductivity
• The airflow slots are clogged.
• Room temperature is too low or too
850 x 596 x 638 mm (maximal 662 mm)
1107 mm
958 mm
850 mm (+ 15 mm - feet regulation)
118 l
8,0 kg
230 V
50 Hz
65 dB
700 W
A+++
1,49 kWh
1)
sensor ( See chapter "
Adjustment of the remaining laundry
moisture degree " for better setting).
high ( optimal room temperature 18°C
to 25°C )
23
2)
Settings -