Explanation Of The (Status) Messages On The Display - Parkside PMRA 20-Li A1 Originalbetriebsanleitung

Explanation of the (status) messages on the display

Text in control
panel
Standby
Enter PIN
Charge
Mowing
Automatic mowing
Spot mode
Fixed point mowing
fi nished
Return
Paused
Emergency stop
Charge for operation
Low battery, charge to
start
It is raining at the
moment, return
Close the cover to start
Charging for operation
interrupted
Work interrupted,
please try again
Please place within the
boundary and try again
Continue the work?
Time incorrectly set
Charging for operation
interrupted
Close the cover to start
Explanation
Lawn mower is in standby mode, no error messages are
present
Prompt for PIN entry
Lawn mower charges
Lawn mower mows
Lawn mower mows automatically
Lawn mower mows a defi ned area
Mowing completed in "spot mode"
Lawn mower on the way back to the charging station
Lawn mower in pause state triggered by:
- Pressing the STOP button
- Pressing the "Pause" button on the APP
The STOP button (9) has been pressed
Lawn mower charges
The charge level of the battery does not meet the minimum
requirements at the start of work:
70 % for automatic mowing
30 % for fi xed point mowing (spot mode)
The rain sensor has been activated
Request to close the cover (1)
Charging was interrupted (e.g. manually or due to a power
failure)
Automatic mowing was interrupted (e.g. STOP button (9)
was pressed, cover (1) was opened)
Request to place the lawn mower inside the boundary wire
Press the OK button (7) to continue the work or press the
Back button (5)
Correct times
Charging process was interrupted, cause to be checked on
site
Close cover (1)
GB MT
55