Dometic OVN0250 Montage- Und Bedienungsanleitung Seite 16

Installing the device
➤ Attach a sign above the device with the following text:
"WARNING!
When cooking, additional ventilation must be provided, e.g. by opening
windows near the grill, hob or oven.
This device must not be used for heating the room."
➤ Open the main shut-off valve.
➤ Check all the connections for leaks with a leak detection spray or a non-corrosive
liquid. Do not use soapy water.
!
WARNING!
Never check for leaks with an open flame or near sources of ignition.
✔ There are no leaks if no bubbles form.
➤ Have a leak test and a flame test performed by an authorized specialist after
professional installation.
Ensure you are issued with a certificate of inspection.
6.6 Connecting the device to the power supply
!
WARNING!
• This device may only be connected to the power supply by a
specialist in accordance with the applicable guidelines and
standards.
• The device must not be connected to the mains voltage (230 Vw),
this would destroy the components and endanger the user.
➤ Use a double cable (Ø 2 x 0.5 mm
➤ Connect the cables to the connector of the refrigerator (fig. d, page 7).
➤ Connect the other ends of the cables to the
A
NOTICE!
• Make sure the polarity is correct.
• Fit the positive (+) cable with a 3 fuse.
– as directly as possible
– rd (red): with a fuse protection (3 A) fitted to the positive (+) pole
– bk (black): to the negative (–) pole
16
2
) to connect the device.
power supply:
12 Vg
OVN0250, OVG0250
EN