Stopping The Engine - Makita EVH2000 Original Bedienungsanleitung

2) When the engine is warm
(1) Place the engine on a flat ground.
(2) Press the primary pump several times.
(3) Confirm that the choke lever is open.
(4) Hold the element cover with a left hand to prevent the engine from moving, settle down to take the stable position.
(5) Pull out slowly the starter handle till a certain resistance is felt. Return the starter handle backward once from this position, then pullit
out with force.
(6) When the engine is difficult to start, open the throttle valve by about 1/3.

STOPPING THE ENGINE

1) Turn the nozzle lever to the CLOSE position.
2) Turn the I-O switch to "O" Position.
3) Move the throttle lever to the SLOW position.
SLOW
Throttle lever
14
NOZZLE LEVER
CLOSED
I-O switch