Maintenance And Cleaning; General Maintenance; Cleaning The Unit - Makita DUS108 Betriebsanleitung

Spraying
WARNING! Never set the unit on the ground during use. Avoid the machine and battery from getting wet
at all times. Do not spray near or directly at the unit.
1. Aim the sprayer nozzle directly at the plants or objects you wish to spray.
2. Never point the spray end of the wand at yourself or others.
3. Be aware of splash back, stand far enough from the object being sprayed to prevent the spray splashing back onto you.
4. Never spray in the direction of people or animals; always spray downwind.
5. Avoid spraying on windy days. Spray can be accidentally blown onto plants or objects that should not be sprayed.
6. Be aware of the volume application rate and check the the volume in the tank from time to time.

MAINTENANCE AND CLEANING

CAUTION:
Always be sure that the machine is switched off and the battery cartridge is removed before attempting to perform
inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed
by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
MAINTENANCE
WARNING! To avoid serious personal injury, always remove the battery pack from the machine when
cleaning or performing any maintenance.
WARNING! Always wear eye protection with side shields or goggles marked to comply with ANSI Z87.1.
Failure to do so could result in fluids entering your eyes resulting in possible serious injury.
WARNING! When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
WARNING! Do not at any time let brake fluids, gasoline, penetrating oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal
injury.
NOTICE: Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all
missing or damaged parts are replaced. Please contact customer service or a qualified service center for
assistance.
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks
may result.
GENERAL MAINTENANCE: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use. Use clean clothes to remove
dirt, dust, oil, grease, etc. Unless stipulated otherwise, we recommend that you arrange for the qualified technician to
check the equipment every 2 years.

CLEANING THE UNIT

WARNING! Always store and dispose of chemicals properly. Disposal of contaminated rinse water
should be performed according to local ordinances and by laws.
17 English