Mixing Aguricultual Chemicals; Starting The Engine - Makita EVH2000 Original Bedienungsanleitung

MIXING AGURICULTUAL CHEMICALS

1) Mixing aguricultual chemicals
1. Aguricultual chemicals are toxic. When working with aguricultual
chemicals, strictly follow the instructions provided by the manufacturer
at all times.
2. Always use the provided strainer when pouring aguricultual chemicals
into the chemical tank.
3. Firmly tighten the chemical tank cap to prevent leaks.
4. If chemicals are to be mixed inside the chemical tank, alwys add water
before other sguricultual chemicals.
CAUTION:
• Always handle agricultural chemicals with the utmost care. Should your skin come into contact with agricultural chemicals by accident,
immediately rinse the affected area with large amounts of water.
2) Using a different type of chemical agent
1. Take extra care to thoroughly rinse the sprayer tank, pump and nozzle
before adding different chemical agents to the sprayer tank. Mixing the
residues of previously used agricultural chemicals with other chemical
agents may cause toxin-induced diseases.

STARTING THE ENGINE

• Never attempt engine start in a place where the fuel has been supplied. When starting the engine, keep a distance of at least 3m.
- Otherwise, it will may cause ignition or fire.
• Exhaust gas from the engine has toxic consequences. Do not operate the engine in a poorly-ventilated place. Such as in a tunnel,
building, etc.
-Operating the engine in the poorly-ventilated place may cause poisoning by exhaust gas.
• In case of derection of any abnormality sound, odor, vibration after start, stop the engine immediately and carry out inspection.
- If the engine is operated without attending such abnomality, an accident may occur.
• Confirm that the engine stops when the stop switch is set to "O" position.
1) Before starting the engine, always confirm that the chemical tank contains
fluid.
2) Turn the nozzle lever to the CLOSED position.
WARNING
12
NOZZLE LEVER
CLOSED