GERATEK Uppsala KG2100P A++ Bedienungsanleitung Seite 64

Setting
Minimum
Normal
Maximum
1. Set the thermostat to position 7.
2. Now let the empty appliance operate for 2 hours.
3. Then set the thermostat to position 4 NORMAL. You can store food in the
appliance now.
4. In case of high outdoor temperatures (e.g. hot summer days) select position
5-7 or higher to set a lower temperature.
5. If you choose a low temperature and some rime is generated at the back of
the appliance, we recommend you select a higher temperature.
6. Adept the temperature setting to the outdoor temperature.
7. If you have disconnected the appliance from the energy supply, wait 3-5
minutes before you restart the appliance. Otherwise the appliance can be
damaged.
The setting definitions are standard values only.
The higher the setting is, the longer the compressor operates to reach the set
cooling temperature.
The description of the cooling levels represents standard values only.
The cooling levels 3 and 4 are suitable for daily use.
You can check the temperature inside the cooling compartment using a
suitable thermometer (not included in the scope of delivery).
When the ambient temperature is very high, it is recommended to set the
temperature controller to a colder setting if needed (cooling level 5 / 6 or 7).
If the colder setting should cause strong formation of encrusted ice, please
select a lower setting (cooling levels 1 - 4).
High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep the temperature
constant inside the appliance.
WARNING! The setting
must unplug the appliance to disconnect it from the mains.
NOTICE! If you want to switch off the appliance for a longer period of
time, disconnect it from the mains (unplug!). S. also Chapter
D
ECOMMISSIONING
0
switches off the compressor only. You
, /
TEMPORARILY
.
64
Position
Position 1
Position 4
Position 7