3.4 Change of the hinge position
WARNING! Switch off and unplug the appliance before changing
the hinge position. RISK OF ELECTRIC SHOCK!
WARNING! Unplug the appliance before you change the hinge
position. Empty the appliance. Carry out the change with at least 2
persons.
CAUTION! The change of the position must be carried out by at
least two persons; otherwise you may hurt yourself or damage the
appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described
below when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the
screws of the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
Empty the appliance.
If possible, remove all door trays, glass shelves and drawers from the fridge so
that they cannot be damaged.
It is necessary to tilt the appliance backwards while removing the doors. Lean
the appliance against a solid and immovable surface so it will not slip while
changing the hinge positions.
Do not lay the unit flat as this can damage the cooling system.
All parts removed must be saved for proper reinstallation of the doors.
Always remove the door(s) carefully. Keep the door(s) in a safe place so
that they cannot be damaged.
Disconnect the appliance from the power supply (unplug).
Slightly tilt the appliance back and secure it in this position. Do not tilt the
appliance more than 45
P
REPARATORY MEASURES
H
OW TO CHANGE THE HINGE POSITION
0
!
0
.
:
59
: