not stand near a fire, naked light or spark-generating devices.
Contact the customer service or the shop you purchased the
appliance at
3. If gas is set free at the installation site:
a) Open all windows.
b) Do not unplug the appliance and do not use the control panel
or thermostat.
c) Do not touch the appliance until all the gas has gone.
d) Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other
sources of ignition when you dispose of or decommission the
appliance.
5. Do not install the appliance near of volatile or combustible
materials (e.g. gas, fuel, alcohol, paints) and in rooms which may
have poor air circulation (e.g. garage).
6. EXPLOSION HAZARD! Do not store any explosive materials or
sprays, which contain flammable propellants, in your appliance.
Explosive mixtures can explode there.
7. While unpacking, the packaging materials (polythene bags,
polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
8. Always observe the required minimum distances for proper
ventilation.
9. Do not connect the appliance to the electric supply unless all
packaging and transit protectors have been removed.
10.
Operate the appliance with 220~240V/50Hz/AC only. All
connections and energy-leading components must be replaced by
an authorized professional. Do not use a socket board or a multi
socket when connecting the appliance to the mains.
11.
A dedicated and properly grounded socket meeting the data
of the plug is required to minimize any kind of hazard. The
appliance must be grounded properly.
12.
Always check that the power cord is not placed under the
appliance or damaged by moving the appliance.
13.
The technical data of your energy supplier must meet the
data on the model plate of the appliance.
14.
Your domestic circuit must be equipped with an automatic
circuit breaker.
14
Depending on model
14
immediately.
51