Operation; Before Initial Operation - GERATEK Uppsala KG2100P A++ Bedienungsanleitung

of the hinge. The seal must close properly.

4. Operation

WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.

4.1 Before initial operation

WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for at least 4 - 6
hours before you connect it to the mains to ensure, that the oil has
flowed back into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature
setting (s. chapter 4.3
any fresh or frozen food in the appliance. If you place food in the
appliance before it has reached its normal operating temperature, this
food can thaw and / or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait at least 4 - 6
hours to ensure proper operation.
4. The settings of the temperature of the fridge can be adjusted manually. To do
this, turn the thermostat for the temperature to the desired setting. (s. chapter
4.3 S
ETTING OF THE TEMPERATURE
5. If operation was interrupted, wait at least 5 minutes before restart.
SETTING OF THE TEMPERATURE
).
).
61
) before you place
CLEANING AND