Operation Via Cable Remote Control - EuroLite DYNAMIC FOG 1200 Bedienungsanleitung

For cable remote control operation, disconnect the DMX cable from the unit. Connect the remote control to the
jack REMOTE CONTROL. As the base of the remote control is magnetic, you can attach it to the fog machine.
Once the green LED lights up, the machine is ready to emit fog.
Manual Fog Output
To manually activate a fog output, press the green MANUAL button. While this switch is kept
pressed, the unit will emit the maximum amount of fog. As soon as you release the button, the
fog output will stop.
The manual mode will take priority over the continuous and timer mode, i.e. when the green
button is pressed, the unit will always emit fog even if one of the other modes is activated.
Continuous Mode
In the continuous mode, the fog machine will emit fog continuously. To activate the continuous
mode, press the red button CONTINOUS, so that it will engage. To deactivate the continuous
mode, disengage the red button CONTINOUS again.
The continuous mode will take priority over the timer mode, i.e. when the red button is pressed,
the unit is set to continuous mode even if the timer mode is activated with the button timer.
Timer Mode
In the timer mode, the fog machine will automatically emit fog. The time intervals and duration
are adjustable.
1
2
3
4

OPERATION VIA CABLE REMOTE CONTROL

To activate the timer mode, press the yellow button TIMER so that it will engage and the
control indicator above the button starts flashing.
With the control INTERVAL, adjust the intervals between the individual fog outputs
between 0 and 30 minutes.
With the control DURATION, adjust the duration of the fog outputs between 1 and 15
seconds.
To deactivate the timer mode, disengage the yellow button TIMER again. The yellow
control indicator above it will be extinguished.
22 • EN