Transportation, Storage And Disposal - Husqvarna DE 110i H Bedienungsanweisung

Error
Error
code
One wire com-
9 munication not
detected.
To move the product short distances
Make sure that the intake valve is closed. Make sure
that the dust caps are on the hoses.
1. Put the product down on the ground.
2. Lift the product manually.
1618 - 006 - 01.06.2023
Description
Product shuts down/ does not
start.
+ Warning diode light on HMI.

Transportation, storage and disposal

Probable cause(s)
Cable disconnected or dam-
aged.
3. If 2 persons lift the product, make sure to use the 2
lifting points.
To move the product long distances
Make sure to use a closed vehicle during transportation
of the product.
Make sure that the intake valve is closed. Make sure
that the dust caps are on the hoses.
1. Make sure that the Longopac is installed on the
product.
2. Make sure that the Longopac bag is empty.
Action(s)
Speak to an ap-
proved service agent.
25