Husqvarna DE 110i H Bedienungsanweisung Seite 16

To install a new Longopac bag cassette
CAUTION:
you install a new Longopac cassette. Refer
To clean the prefilter with water on page
to
20 .
1. Put the Longopac cassette around the inner edge of
the Longopac holder.
2. Remove the 4 straps after you put the Longopac in
the holder.
3. Pull the inner layer of the Longopac cassette up (A)
and fold it into the holder (B).
A
4. Attach the Longopac holder to the rear part of the
container (A). Then attach the Longopac holder to
the sides and to the front of the container (B). Push
the Longopac holder up until you hear a solid click.
A
16
Clean the prefilter before
B
5. Make sure that the Longopac is sealed.
B
6. Pull the outer layer of the Longopac cassette down.
1618 - 006 - 01.06.2023