Respekta CH 44060 GAM Bedienungsanleitung Seite 29

English
17. General INSTALLATION INSTRUCTIONS
Comply with safety distance between hob and hood.
B3
B10
15.
Hang the cooker hood on the suspension plate B3
through the 2 holes B15
16.
Fix
the exhaust hose B12 on the nozzle 10
according to B13 or B14.
17.
Slide the chimney shafts B6 & B8
carefully, that the external (lower) chimney shaft hangs on the mounting bracket B4
picture B5.
18.
Slide the internal chimney shaft B8 up and fix it on the mounting bracket B7
described in picture B9.
According to the specific situation the assembly procedure might proceed differently.
fi1912105TNM
Installation- & User's Instruction
B8
B6
B15
on the wall, so that the hood can not accidentally be removed from the wall.
and to its final position at the other end of the hose
one inside the other and put them on the cooker hood. Then check
(See chapter 11.1)
B7
B4
B12
again and secure it well by fixing the screws
13
Some Figures are for illustration purposes only
Chimney cooker hoods
B9
B5
B9
as described in
with 2 screws as
GB
B13
B14