4.3.
Transport mit dem Gabelstapler / Transport by forklift truck
Transport von vorn
Gabel-Anschlagpunkte
Heben Sie die Maschine mit einem Gabelstapler an.
Stellen Sie die Gabelbreite entsprechend der
Grundgestell-Abmessung ein.
Achten Sie darauf, dass die Gabeln komplett unter
der Maschine durchreichen und zur Sicherheit etwas
herausragen.
Achten Sie darauf, dass die Pedalleiste, Kabel und
Schläuche usw. beim Transport nicht beschädigt
werden.
4.4.
Anschlagpunkte / Lifting points
Baugruppe
Maschine komplett
ca. 190 kg
Subassembly
Entire
approx. 190 kg
machine
23.05.2017
Gewicht
Schwerpunkt
Siehe Kap. 4.3
Weight
Centre of gravity
See chap. 4.3
Kragen- und Manschettenpresse 8905
Transport von der Seite
Gabel-Anschlagpunkte
Lift the machine by means of a forklift truck.
Adjust the width of the fork the ground frame
dimensions.
Make sure that the fork reaches entirely under the
machine and, for safety reasons, comes out on the
other end.
Make sure that the pedal strip, cables, hoses etc. are
not damaged during transport.
Anschlagpunkte
Unter dem
Grundgestell
Anschlagpunkte
underneath the ground
frame
8905 Collar and Cuff Press
Hebezeug
Gabelstabler
Lifting device
Forklift truck
26