2.4.
Eingebaute Sicherheitssysteme / Built-in safety systems
1.
Schutzhaube
2.
Sicherheitsrahmen
3.
Hauptschalter
4.
Schutzbügel
Die Sicherheitssysteme sind entsprechend den angegebenen
Intervallen (t = täglich, w = wöchentlich, m = monatlich, j =
jährlich) nachfolgenden Prüfungen (S = Sichtkontrolle, F =
Funktionskontrolle, M = Messung) vor der Inbetriebnahme zu
unterziehen.
Die Maschine verfügt über folgende
Sicherheitseinrichtungen:
Hauptschalter (Pos. 3)
Er trennt/verbindet die Maschine vom/mit dem
Stromnetz und befindet sich seitlich an der
Maschine am Schaltschrank.
Der Hauptschalter muss bei Wartungs- und
Reparaturarbeiten in der AUS-Position mit einem
Vorhängeschloss gegen Wiedereinschalten gesichert
werden.
23.05.2017
1.
Protective hood
2.
Safety frame
3.
Main switch
4.
Hoop guard
Before commissioning the machine, the following checks (S =
visual inspection, F = functional inspection, M = gauging) have
to be carried out on the safety systems at the stated intervals
(t = daily, w = weekly, m = monthly, j = annually).
The machine disposes of the following safety
devices:
Main switch (Pos. 3)
It disconnects/connects the machine from/to the
power supply and is located at the side of the
machine on the switch cabinet.
In case of maintenance or repair work, the main
switch has to be padlocked in the OFF position.
Kragen- und Manschettenpresse VEIT 8905
VEIT 8905 Collar and Cuff Press
Intervall/
Interval
w
1
2
3
4
Prüfung/
Check
F
14