Mounting - Danfoss 088U0213 Benutzerinstruktion

Instruction CF-RF Room Thermostat with InfraRed Floor Sensor

5. Mounting

Placing the Room Thermostat - fig. 3
• The Room Thermostat should be placed in
accordance with fig. 
IMPORTANT!
Wherever possible, the room thermostat should
be installed at a place where the effect of sunlight,
strong artificial light (e.g. halogen spotlight),
draught, other heat-emitting equipment (e.g. TVs)
etc. is avoided.
! Please note that no furniture, rugs etc. should be
permanently placed within the area of the InfraRed
Floor Sensor as shown in fig. 3.
Mounting - fig. 2
. Mount the back plate
and wall plugs
back plate
2. Slide thermostat into place on the back plate
. If desired lock the thermostat to the back plate
with Allen key
VI.UH.R1.80
via the screw holes
(turn 90°)
Produced by Danfoss Floor Heating Hydronics 0.2006
with the two screws
in the