Noise/Vibration Information; Declaration Of Conformity; Changing The Tool - Bosch GRW Professional 12 E Originalbetriebsanleitung

OBJ_BUCH-1972-003.book Page 11 Monday, November 4, 2013 2:14 PM
Stirrer/Mixer
Maximum stirrer paddle diameter
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and
h
uncertainty K determined according to
EN 60745:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Bosch Power Tools
GRW 12 E
mm 140
kg
GRW 12 E
3 601 AA7 0..
dB(A)
dB(A) 100
dB
2
m/s
2
m/s
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
27.06.2013
Assembly
 Before any work on the machine itself, pull the mains
plug.

Changing the Tool

Stirrer Paddle with Male Thread, Size M 14
5
Screw the stirrer paddle 5 into the drive spindle 4. To do so,
hold the drive spindle 4 using an open-ended spanner
(GRW 12 E: width across flats 22 mm, GRW 18-2 E: width
English | 11
GRW 18-2 E
180
5.3 7.2
/II /II
GRW 18-2 E
3 601 AA8 0..
89 87
98
3
4.5 8.5
1.5 1.5
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
4
1 609 92A 0HJ | (4.11.13)
3