Herunterladen Inhalt Inhalt Diese Seite drucken

Wartung Und Pflege; Maintenance And Service - Sebo EVOLUTION 320 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

27
28
7
29
15
30
47
Ihr Bürststaubsauger ist mit einer Blo-
ckierungsanzeige (27) ausgestattet. Bei
36
einer Blockade oder Überlastung der
Bürste, wird das Gerät automatisch
abgeschaltet und eine orange Anzeige
erscheint im Display (36).Ziehen Sie in
diesem Fall den Netzstecker und über-
prüfen Sie die Bürste auf Verunreini-
gungen.
ACHTUNG - Bei allen Wartungs- und
Reinigungsarbeiten Gerät ausschalten
und Netzstecker ziehen.
Zur Benutzung des Teleskoprohres (7)
und des Teleskopschlauchs (6) das Ge-
rät in die aufrechte Position bringen.
6
Dann das Teleskoprohr nach oben he-
rausziehen und den Schlauch spannen
18
bis er einrastet. Zum Zurückstecken
17
das Teleskoprohr in das Gelenk einfüh-
ren und es dann mit dem Griff auf den
Nocken am Filtergehäuse stecken.
Der Teleskopschlauch des SEBO EVO-
LUTION 370/470 kann auch ohne Tele-
skoprohr genutzt werden. Hierzu kann
der Schlauch (6), unter Drücken der
Taste (28) auf der Rückseite des Tele-
skoprohres (7), einfach aus dem Teles-
koprohr gezogen werden. Nach der An-
wendung kann er ganz einfach wieder
in das Teleskoprohr gesteckt werden
und gleitet automatisch zurück. Das auf
der Rückseite des Gerätes integrierte
Zubehör (17,18) passt sowohl auf die
Öffnung des Saugrohres als auch des
Schlauches.
4

8. Wartung und Pflege

Filteranzeige
Die orange Filteranzeige (4) zeigt einen
reduzierten Luftstrom an. Entweder
liegt eine Verstopfung vor (siehe Ab-
schnitt Verstopfungen beseitigen) oder
die Filtertüte muss gewechselt wer-
den. Je nach Art des Füllgutes kann ein
Wechsel erforderlich sein, ohne das die
Filtertüte bis oben gefüllt ist.
Wechsel der Filtertüte
Zum Filtertütenwechsel das Deckel-
schloss (15) öffnen und den Deckel (29)
46
von dem Filtergehäuse abnehmen. Die
Filtertütensicherung (30) nach rechts
drücken, die Filtertüte wechseln, wie
auf deren Vorderseite illustriert. Dabei
sicherstellen, dass die grüne Platte (47)
auf beiden Seiten richtig in die Führung
des Filterhalters (46) geschoben und
eingerastet ist. Gebrauchte Filtertüten
können mit Deckeln verschlossen wer-
den, die jeder SEBO Filterbox und Ser-
vice-Box beiliegen.
This vacuum cleaner has a brush
jammed indicator (27). If the brush is
jammed or overloaded the machine
will automatically switch-off and the
orange indicator shows in the display
(36). If this occurs, unplug the machine
and clear the obstruction.
CAUTION - ALWAYS unplug from the
mains socket before dismantling any
part of the machine.
To use the attachment tube (7) or hose
(6) put the machine in the upright
position, then lift the tube from the
machine and stretch out the hose until
it locks. When the tube is returned to
the machine, ensure it is pushed down
over the projection (35) on the housing.
The hose(6) can be used on its own. For
these purposes, please push the button
(28) on the backside of the tube (7) and
extracted the hose(6) out of the tube (7).
After using put the hose back into the
tube. The attachments (17,18) fit either
to the end of the hose or the end of the
tube.

8. Maintenance and Service

Bag full indicator
If the warning indicator(4) turns orange,
it indicates that there is a reduced
air flow. This is caused either by dirty
filters, a blockage in the hose or base of
the machine. (To clear, refer to blockage
section), or a full paper bag. Picking up
fine dust may require an earlier change
even when the bag is not full. Fluff or
hair lets air pass through easily, so in
this case the bag may overfill.
Changing the paper bag
To change the paper bag, lift the catch
(15) and remove the bag cover (29).
Push the lever (30) over to the right.
Then change the bag, as illustrated on
its front. Please ensure that the bag
top (47) is located properly on both
sides of the holder (46) and pushed in
until it locks. The used paper bag can
be sealed with a cap, which is included
with each bag in the SEBO Filterbox
and Service-Box.
DO NOT RE-USE PAPER BAGS.
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Evolution 370Evolution 470

Inhaltsverzeichnis