Inhaltsverzeichnis
Werbung
EN
MAINTENANCE INSTRUCTIONS
All our awnings 'Made in Italy' and manufactured following high standards. Apart from
our strict quality controls, we also have our fabrics continuously controlled by
inependent in stitutes to ensure that the fabric is tear resistant, they can hold the
weght of water, the colours don't fade and it is resistent against atmospheric agents. In
order to enjoy your awning for a long time, even for many years after the purchase
date, we ask you to take note of and follow the simple advices below:
MAINTENANCE INSTRUCTIONS FOR YOUR AWNINGS
1.
Basic guideline to clean the fabric of the awning and the Privacy-Room
Make sure that your awning is completely dry and clean before closing it.
The remaining humidity could cause stains. If however you have no choice but closing
the awning when it is still wet, make sure to open it for drying within 12 hours
maximum.
Most of the dirt is superficial and can be removed with clean water and a cloth or a
brush. If the fabric is very dirty, add some light cleaning detergent. Be aware never to
use any aggressive chemical substances and never to clean the fabric
with a high pressure machine.
We recommend not to use the awning at a temperature below 0°C.
2.
Additional information for the consumer
The awnings are made with precision, but some of the characteristics of the
materials, which could be interpreted as defects, derive from the materials and from
the specific work processes, and these characteristics occur even though Fiamma
uses advanced and innovative machines production
techniques.
3.
The following characteristics are not grounds for reclamation:
·
To guarantee a perfect quality, the fabrics are waxed or laminated several times.
During this operation, single coloured pigments could move and thus create small
bright spots in the material, which are only irregularities that are technically
inevitable to avoid, but do not influence the impermeability of the fabric.
The fabric is therefore completely hermetic, also in these spots.
·
During the production of the material, small creases could form, which especially on
bright fabric in backlight could seem dark. Bright stripes (the so called white crease)
are inevitable with these materials.
·
With time the influence of weather could cause change in colour.
®
34
®
Werbung
Inhaltsverzeichnis
