Technical Specifications - Vision VX 5000 PRO Benutzerhandbuch

TECHNICAL SPECIFICATIONS

Model
Channels
Circuit
OUTPUT POWER RMS @ 14.4 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 1 Ohms
Loudspeaker Impedance
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
THD+N
Filter Section
Sub Sonic Filter
Low Pass Filter
Bass Boost
Input Sensitivity
RCA Low Level Input mono
RCA High Level Input mono
Recommended fuse rating
4 Ohm Operation
2 Ohm Operation
1 Ohm Operation
Dimensions
All specifications are subject to change / The scope of delivery does not include a device fuse.
CAUTION
Due to the high power consumption of the amplifier, we only recommend operation with a suitable
12V additional battery. You can obtain more information on this from specialist retailers.
We recommend operating the amplifier only with a power capacitor to ensure a more constant
power supply. More information on pages 18 and 19.
16
10 ~ 90%
ENGLISH
VX 5000 PRO
1
Digital Ultra Class D
1 x 1800
1 x 3300
1 x 5000
1 - 8 Ohm
10 - 5.000 Hz
> 10.000
100 dB
< 0,03 %
10 - 100 Hz
50 - 5.000 Hz
0 - 12 dB @ 30 - 70 Hz
0,4 - 3,6 V
1,0 - 9,0 V
1 x 150 A
1 x 250 A
1 x 500 A
191 x 66 x 270 mm
5 ~ 50°C