Salora SMART55TV Bedienungsanleitung Seite 53

broadcasts. Set corresponding to your environment
and preference. Disable by setting as if you want
to manually change the date or time. Then set date,
time, time zone and hour format options.
Timer
Power On Time Type: Set your TV to turn on by
itself. Set this option as On or Once to enable a
power on timer to be set, set as to disable. If
set as Once the TV will turn on only once at the
Auto Power On Time option below.
Auto Power On Time: Available if the Power On
Time Type is enabled. Set the desired time for your
TV to come on from standby using the directional
buttons and press OK to save the new set time.
itself. Set this option as On or Once to enable a
to disable. If
set as Once
option below.
Available if the
Time Type is enabled. Set the desired time for your
TV to go to standby using the directional buttons and
press OK to save the new set time.
Language: Set your language preference.
Keyboard: Select your keyboard type and manage
keyboard settings.
Inputs: Show or hide an input terminal, change the
for HDMI CEC (Consumer Electronic Control) function
and display the CEC device list.
Power
Sleep Timer:
your TV to enter sleep mode automatically. Set as
to disable.
Select this option and press OK to turn
the screen on again. Note that you can not turn the
screen on via the Volume +/-, Mute and Standby
buttons. These buttons will function normally.
Set the behaviour of
the TV, when no signal is detected from the currently
set input source.
to disable.
Auto Sleep:
want your TV to enter sleep mode automatically. 4
Hours, 6 Hours and 8 Hours options are available.
Set as Never to disable.
Picture
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be
set to one of these options: Standard, Vivid, Sport,
Movie and Game.
Dolby Vision Modes: If Dolby Vision content is detected
Dolby Vision Bright, Dolby Vision Dark and Dolby Vi-
sion Vivid picture mode options will be available instead
of other picture modes.
Backlight, Brightness, Contrast, Colour, HUE,
Sharpness settings will be adjusted according to
the selected picture mode.
pearance preference for Dolby Vision content. When
turned on, Dolby Vision logo will be displayed on
the screen when Dolby Vision content is detected.
Auto Backlight: Set your auto backlight preference.
, Low, Middle and Eco options will be available.
Set as to disable.
Backlight: Adjust the backlight level of the screen
manually. This item will not be available if the Auto
Backlight is not set as .
Brightness: Adjust the brightness value of the
screen.
Contrast: Adjust the contrast value of the screen.
Colour: Adjust the colour saturation value of the
screen.
HUE: Adjust the hue value of the screen.
Sharpness: Adjust the sharpness value for the
objects displayed on the screen.
Gamma: Set your gamma preference. Dark, Middle
and Bright options will be available.
Colour Temperature: Set your colour temperature
preference. User, Cool, Standard and Warm op-
tions will be available. You can adjust red, green and
blue gain values manually. If one of these values
is changed manually, Colour Temperature option
will be changed to User, if not already set as User.
Display Mode: Set the aspect ratio of the screen.
your preference.
HDR:
be available if HDR content is detected.
Advanced Video
DNR: Dynamic Noise Reduction (DNR) is the
process of removing noise from digital or analogue
signals. Set your DNR preference as Low, Medi-
um, Strong, Auto
MPEG NR: MPEG Noise Reduction cleans up
block noise around outlines and noise on the back-
ground. Set your MPEG NR preference as Low,
Medium, Strong
Max Vivid: Manipulates contrast and colour
perception, basically converts Standard Dynamic
Range picture to High Dynamic Range picture. Set
as On to enable.
Adaptive Luma Control: Adaptive Luma control
adjusts contrast settings globally according to
English - 18 -
content histogram in order to provide deeper black
and brighter white perception. Set your Adaptive
Luma Control preference as Low, Medium,
Strong
Local Contrast Control: Local contrast control
provides ability to apply independent contrast set-
-
details and provides better contrast perception.
It makes higher depth impression by enhancing
dark and bright areas without any detail loss. Set
your Local Contrast Control preference as Low,
Medium, High
Flesh Tone: Adjusts the skin tone brightness.
Set your preference as Low, Medium, or High
to enable. Set as
DI Film Mode: It is the function for 3:2 or 2:2
or judder) which are caused by these pull down
methods. Set your DI Film Mode preference as
Auto or
will not be available if Game Mode or PC Mode
is turned on.
Blue Stretch: Human eye perceives cooler whites
as brighter white, Blue Stretch feature changes
White balance of mid-high grey levels to cooler
colour temperature. Turn the Blue Stretch function
Game Mode: Game mode is the mode which cuts
down some of the picture processing algorithms
to keep up with video games that have fast frame
rates.
Note: The
YouTube. If you want to use the game mode for Multi
Media Player or HDMI source, you need to set the MJC
option to .
ALLM: ALLM (Auto Low Latency Mode) function
This item will allows the TV to activate or deactivate low latency
settings depending on playback content. Highlight
this option and press OK to turn the ALLM function
PC Mode: PC Mode is the mode which cuts down
some of the picture processing algorithms to keep
signal type as it is. It can be usable especially for
.
RGB inputs.
De-Contour:
low-resolution content and auto streaming servic-
es. Set your preference as Low, Middle, or High
.
to enable. Set as
MJC: Optimises the TV's video settings for
motional images to acquire a better quality and
readability. Highlight this option and press OK to
see available options.
and Demo options will be available. Set the
option to Low, Middle, or High to enable
the MJC function. When enabled, Demo Parti-
tion and Demo options will become available.
. Highlight Demo Partition and press OK to set
your preference. All, Right and Left options will
be available. Highlight Demo and press OK to
activate the demo mode. While the demo mode
is active, the screen will be divided into two sec-
tions, one displaying the MJC activity, the other
displaying the normal settings for the TV screen.
If the Demo Partition option is set to All, both
sides will display the MJC activity.
. HDMI RGB Range: This setting should be ad-
justed according to input RGB signal range on
HDMI source. It can be limited range (16-235)
or full range (0-255). Set your HDMI RGB range
to disable.
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Low Blue Light: Electronic device screens emit
blue light that can cause eye strain and may lead
to eye problems over time.
. This item
of blue light set your preference as Low, Middle,
or High. Set as
Colour Space: You can use this option to set the
range of colours displayed on your TV screen.
When set as On, colours are set according to the
source signal. When set as Auto, the TV decides
cording to source signal type. When set as
TV's maximum colour capacity is used by default.
Colour Tuner: Colour saturation, hue, brightness
can be adjustable for red, green, blue, cyan, ma-
more vivid or more natural image. Set the HUE,
Colour, Brightness, Offset and Gain values
manually. Highlight Enable and press OK to turn
this function on.
11 Point White Balance Correction: White bal-
ance feature calibrates TV's colour temperature in
detailed grey levels. By visually or measurement,
grey scale uniformity can be improved. Adjust the
strength of the Red, Green, Blue colours and Gain
value manually. Highlight Enable and press OK to
turn this function on.
Reset to Default: Reset the video settings to factory
default settings.
Note: Depending on the currently set input source some menu
options may not be available.
Sound
to disable.
System Sounds: System sound is the sound
played when navigating or selecting an item on the
TV screen. Highlight this option and press OK to
, Demo Partition,
English - 19 -
to disable.
-
, the