Other Connections; Turning On/Off The Tv; Tv Control & Operation - Salora SMART55TV Bedienungsanleitung

Other Connections

any connection. After the connection is done, you can turn on the units and use them.
Connector Type Cables
HDMI
Connection
SPDIF
SPDIF
(Optical Out)
Connection
HEADPHONE
Headphone
Connection
USB
Connection
CI
Connection
LAN
Ethernet
Connection
LAN / Ethernet Cable
When using the wall mounting kit
Device
(contact your dealer to purchase one,
if not supplied), we recommend
that you plug in all cables before
mounting the TV on the wall. Insert
or remove the CI module only when
the TV is SWITCHED OFF. You
should refer to the module instruction
manual for details of the settings.
The USB inputs on the TV support
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your TV.
When connecting equipment using a
HDMI cable to your TV, to guarantee
frequency radiation and trouble-free
nals, such as 4K content, you have
to use a high speed shielded (high
grade) HDMI cable with ferrites.
English - 6 -

Turning On/Off the TV

Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Plug one end (the two-hole plug) of the supplied
-
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet. The TV will switch on automatically.
Note:
on the model.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
Press the Standby button on the remote control.
Press the control button on the TV.
The TV will then switch on.
To switch the TV into standby
The TV cannot be switched into standby mode via
control button. Press and hold the Standby button on
the remote control.
the screen. Highlight OK and press the OK button. The
TV will switch into standby mode.
To power down the TV completely, unplug the power
cord from the mains socket.
Quick Standby Mode
In order to switch the TV into quick standby mode
either;
Press the Standby button on the remote.
Press again to go back to operating mode.
Press the control button on the TV.
Press the control button again to go back to operating
mode.
Your TV continues to operate in the quick standby
mode state, as it regularly checks for updates. This is
not a malfunction, it meets the requirements for energy
consumption. In order to minimise energy consumption
switch your TV into standby mode as explained above.
TV Control & Operation
The control button allows you to control the Quick
Standby-On function of the TV.
Note:
on the model.
button to turn the TV into quick standby mode.
switched into standby mode via control button.
To turn on the TV: Press the control button, the TV
will turn on.
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
Operation with the Remote Control
Press the Menu button on your remote control to
display Live TV settings menu when in Live TV mode.
Press Home button to display or return to the Home
Screen of the Android TV. Use the directional buttons
to move the focus, proceed, adjust some settings and
press OK to make selections in order to make changes,
set your preferences, enter a sub-menu, launch an
application, etc. Press Back/Return to return to the
previous menu screen.
dialogue will appear on
Input Selection
Once you have connected external systems to your
Source button on your remote control consecutively
or use the directional buttons and then press the OK
mode. Or enter the Inputs menu on the Home Screen,
select the desired source from the list and press OK.
Changing Channels and Volume
You can adjust the volume by using the Volume
+/- buttons and change the channel in Live TV mode
by using the Programme +/- buttons on the remote.
English - 7 -
Press the control
The TV cannot be