Startup / Operation - BOMANN DT 7311 DT Bedienungsanleitung Und Garantie

Doppeltür-kühlschrank

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

NOTE: : : :

NOTE

* * * * Delivery scope!

•

Keep the parts to be replaced for another possible

door stop change.

• Loosen the hinge cover and the blind cap on the

appliance top. Disassemble the upper door hinge;

lift out the upper unit door.

• Move the hinge pin holder on the door top side.

• Release the doorstop and fasten the delivered

doorstop* on the other door underside. Set the

door safely aside.

• Disassemble the middle door hinge; lift out the

lower unit door.

• Move the hinge pin holder on the door top side.

• Release the doorstop and fasten the delivered

doorstop* on the other door underside. Set the

door safely aside.

• Tilt the unit slightly backwards and lock it in this

position. Unscrew the feet and disassemble the

lower door hinge.

• Transfer and fasten the lower door hinge to the

opposite appliance side after unscrewing the

hinge pin and replacing it from the other hinge

side. Screw in the feet.

• Put the appliance back in the upright position.

Move the blind plugs on the exposed holes of the

middle door hinge.

• Put on the lower door and fix it in its intended

position.

• Turn the middle door hinge about 180°, transfer

and fasten it to the opposite appliance side.

• Put on the upper appliance door and fix in its in-

tended position.

• Transfer and fasten the upper door hinge to the

opposite appliance side after unscrewing the

hinge pin and replacing it from the other hinge

side.

• Attach the enclosed hinge cover* and the blind

cap on the appliance top.

Check that the doors are aligned vertically and hori-

zontally to ensure proper opening and closing of the

doors.