ZENEC ZE-NC2010 Bedienungsanleitung Seite 68

1. Searching for nearby phones.
1. Activate the Bluetooth mode on the mobile phone und check, if it allows to detect it from
other devices resp. if the function to search for Bluetooth devices is activated.
2. Touch the Add icon to open the search menu and to start the search run.
3. After the mobile phone was found from the unit and a Bluetooth connection was
established, the name of the mobile phone will appear on the screen of the unit.
4. Choose the mobile phone on the unit, touch the Connect icon and enter the PIN code,
which is in the delivery status 1234.
Depending on the mobile phone and the settings, it's also required to enter the PIN code
on the mobile phone a second time.
5. After the pairing between the unit and the mobile phone is finished, depending on the
mobile phone, it's necessary to confirm the pairing once more to complete this process.
2. Pairing from your mobile phone.
1. Activate the Bluetooth mode on the mobile phone.
2. Open the Bluetooth mode of the unit.
3. Start the search for Bluetooth units on the mobile phone.
4. After the unit is found by the mobile phone and a Bluetooth connection was established,
the unit will appear with the description ZE-NC2010 on the mobile phone.
5. Choose ZE-NC2010 on the mobile phone and enter the PIN code, which is in the delivery
status 1234.
6. After the pairing between the unit and the mobile phone is finished, depending on the
mobile phone, it's necessary to confirm the pairing again to complete the procedure.
All manuals and user guides at all-guides.com
68