ZENEC ZE-NC2010 Bedienungsanleitung Seite 56

ANTI-THEFT CODE
■ To secure the unit from a theft and later use, it's possible to enter a four-digit anti-theft
code.
If the anti-theft code is activated and the unit will be disconnected from the power supply
and reconnected again, it's necessary to enter the anti-theft code to start up the unit.
Otherwise it's not possible to restart the unit.
The delivery status for the input of the anti-theft code is deactivated, so it's not necessary
to enter the anti-theft code, when the unit was disconnected from the power supply.
1. Touch the Anti theft icon and activate the anti-theft function.
2. Touch the AntiCode icon and use the keypad, which appears on the screen, to enter the
four-digit anti-theft code and confirm your input by entering the same code a second time.

NOTE:
■ The delivery status of the anti-theft code, with the unit new cut of the box is deactivated and
you must activate it manually.
■ Please note down the anti-theft code and keep it in a safe place, so you can find it when you
need it. If the anti-theft code is entered wrong three times, it's necessary to enter the super
code to unlock the unit again. To unlock the unit with the super code, it's unavoidable to send
it back to an authorized ZENEC-dealer.
■ If you want to change or deactivate the anti-theft code, you must enter a valid code first.
All manuals and user guides at all-guides.com
56