Mankenberg UV 5.1 ATEX H2 Betriebsanleitung Seite 16

Supplement to the Operating Instructions for
Back pressure regulators UV 5.1 ATEX H2
If the pipe section is flushed and/or dried after assembly or pressure testing, it isnecessary to
make sure that the fitting has not been damaged by corrosion or excessively high temperature.
note
If any leakage occurs on the fitting, section Troubleshooting help [} 20] should be observed.
UV 5.1 ATEX H2-4.X.22.5 Issue 21.12.2022
16
www.mankenberg.com