Quax LOFT 54F01003C Bauanleitung Seite 31

LOFT 54F01003C
5. Turning into a junior bed
Step 5.1 : Removing the bottom and sides with bars
and moving the legs. Use eight connectors K
Loosen the bolts (G) on the top of the slatted frame
and remove the bottom. Loosen all bolts (D) in both
headboards and remove the side with bars. Be care-
ful that not everything falls apart and causes scratch-
es. Remove the eye tips (H) from the headboards.
Loosen the bolts (E) in each leg and remove the legs.
Turn the end sides 90° and place the feet on the new
drillings in the headboards. Push two bolts (E) into
the holes of each leg and tighten them into the nuts
of the headboards.
Tighten the connectors (K) in the drillings on the in-
side of the headboards.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T T 0032 9 380 80 95 www.quax.eu - E E info@quax.eu
31