Heating Up - Philips GC9642/60 Gebrauchsanleitung

descaled water or other chemicals, as they may cause water
spitting, brown staining or damage to your appliance.
Note: Do not tilt or shake the appliance when the water tank is
full, otherwise water may spill out of the filling hole.

Heating up

1 Put the plug in an earthed wall socket.
2 Press the on/off button to switch on the appliance.
, The blue power-on light on the appliance and the 'iron
ready' light start to flash to indicate that the appliance
is heating up.
, When the appliance is ready for use, the 'iron ready
light' and the power-on light stop flashing and light up
continuously. Additionally you hear a short beep.
Note: Water is pumped into the boiler inside the appliance,
which causes the appliance to produce a pumping sound for
up to 2 minutes. This is normal.
ENGLISH
11