Ironing Tips; Auto Shut Off (For Specific Types Only) - Philips GC4549 Benutzerhandbuch

Warning: Hot steam comes out of the iron. Do not remove
wrinkles from a garment while someone is wearing it. To
prevent burns, do not direct the steam at people.
Note: The steam boost function should only be used at
temperature setting between ●●● to MAX. Leaking may
appear if you use steam boost at too low a temperature.

Ironing tips

Minimizing wrinkles while drying
Start wrinkle removal early in the drying process by spreading
out the laundry properly after washing. Put the garments on
hangers to let them dry naturally with less wrinkles.
Shirt ironing
Start with the time-consuming parts such as collar, cuff links
and sleeves.
Next, iron the bigger parts like front and back. By doing this,
you prevent wrinkling the bigger parts when you are busy
ironing the time-consuming ones.
Collar: When you iron a collar, start on its underside and iron
from the outside (the pointy end) inwards. Turn over and repeat.
Fold down the collar and press the edge for a crisp finish.
Buttons: Iron on the reverse side of the buttons for more
effective faster ironing.
Auto shut off
The auto shut off function automatically switches off the iron
if has not been used for 30 seconds resting on its soleplate or
8 minutes resting on its backplate. The auto-off light will start
flashing.
-
To let the iron heat up again, pick up the iron or move it
slightly. The auto-off light goes out.
ENGLISH
13