Eco Setting; Ironing Tips; Auto-Off Mode (Specific Types Only) - Philips GC9200 Bedienungsanleitung

EnGlish
14

ECO setting

During ironing, you can use the ECO setting to save energy but
still have sufficient steam to iron all your garments.
Note: For the best results, we advise you to use the 'Optimal
Temp' setting.
1 Press and hold the on/off button for 2 seconds until the
light turns green.
2 To switch back to the 'Optimal Temp' setting, press the
on/off button to switch off the steam generator and then
switch it on again.

ironing tips

Minimising wrinkles while drying
Start wrinkle removal early in the drying process by spreading out
your laundry properly after washing and by putting garments on
hangers to make them dry naturally with fewer wrinkles.
Best practice shirt ironing
Start with the time-consuming parts like collar, cuff links and sleeves.
Next, iron the bigger parts like front and back to prevent wrinkling
the bigger parts when you are busy ironing the time-consuming
parts.
Collar: When you iron a collar, start on its underside and work
from the outside (the pointy end) inwards. Turn over and repeat.
Fold down the collar and press the edge for a more crisp finish.
Buttons: Iron on the reverse side of the buttons for more effective
and faster ironing.

Auto-off mode (specific types only)

- To save energy, the steam generator switches off
automatically when it has not been used for 10 minutes and
the auto-off light in the on/off button starts to flash.
- To activate the steam generator again, press any button on the
steam generator. The steam generator starts to heat up again.