Nordcap FKM 2 PLUS Bedienungsanweisung Seite 9

4.6 Anomalies
If you notice any anomalies or malfunctions, before calling the technical services, check that:
Anomaly
The equipment does not
work
The equipment does not
reach the temperature
If the problem persists, it is recommended that you remove everything from inside the appliance, unplug it, and seek technical
assistance.
Note: Maintenance must be carried out by specialised staff and the manufacturer declines any responsibility for the use of
unauthorised parts which cancel the guarantee.
Instruction Manual
Verify
The switch is off
The switch is connected but is not
lightened
The switch is connected and lightened
Opened door
Closed door and blocked evaporator
Closed door and cleaned evaporator
The evaporator is covered by products
Connect the switch
Check if the plug is well inserted
Check if the plug has current
Check the microprocessor parameters
Close the door
Provoke a defrosting to clean the evaporator
Clean the condenser
The equipment is close to heat sources
Room temperature is too high
(see equipment climate class)
Respect the maximum height of products
placement
9
N.º
MNS00007_02
(17)
To do