Radson UFH - RF Bedienungsanleitung Seite 18

N°
Names
Calibration of the internal sensor
(The calibration must be done
after 12Hours working with the
same setting temperature)
04 AiC
Calibration of the Floor sensor
05 FLC The calibration must be done
after 12Hours working with the
same setting temperature.
Description Default setting
- To check the temperature in the room, put a
thermometer at 1.5M distance to the floor in the
concerned room and wait 1 hour to be sure that
the thermometer show the correct temperature.
Then you can enter the value saw on the
thermometer with (-) or (+) keys.
- When a calibration is made the message "Yes"
will be displayed.
- To erase the calibration press simultaneity (-)
and (+) keys when "Yes" is displayed. Now the
message "no" should be displayed.
The calibration must be done same as described
above if the external sensor is connected and
used like an external ambiance sensor.
If the external sensor is used as floor sensor, the
thermometer should be put on the floor.
18
Other possibility