Qlima D 225 Benutzerhandbuch Seite 47

Before connecting the unit, check the following:
• The voltage supply must correspond with the
mains voltage stated on the rating label.
• The socket and power supply must be suitable for
the current stated on the rating label.
• The plug on the cable of the device must fit into
the wall socket.
• The device must be placed on a flat and stable sur-
face.
The electricity supply to the device must be checked
by a recognised professional if you have any doubts
regarding the compatibility.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety.
• This device is manufactured according to CE safe-
ty standards. Nevertheless, you must take care, as
with any other electrical device.
• Do not cover the air inlet and outlet grill.
• Empty the water reservoir before moving the unit.
• Never allow the device to come into contact with
chemicals.
• Never spray the unit with or submerge in water
• Do not insert objects into the openings of the unit.
• Always remove the plug from the electric power
supply before cleaning or replacing the unit or
components of the unit.
• Never use an extension cable to connect the device
to the electric power supply. If there is no suitable,
earthed wall socket available, have one installed
by a recognised electrician.
4
47