EN
Installation
7
10
7.
Connect hose from pull outlet to T-part of mixing water.
8.
Connect cold-, warm- and mixing water hoses from box
to the T-part.
9.
Connect sensor ring to electronic module.
10.
Make power connection (battery or mains).
11.
Attach lead weight for pull outlet.
12.
Open corner valves and check armature connection of leak
tightness.
SanTec VIVA / PUREA
22
Kitchen tap
VIVA / PUREA
8
11
9
12
Attention!
Following steps must be
done in order as described
necessarily!
Attach sealings at all
connection hoses!