WimTec SanTec VIVA Montage- Und Bedienungsanleitung Seite 21

Installation
1
4
!
Attention!
Following steps must be
done in order as described
necessarily!
Attach sealings at all
connection hoses!
VIVA / PUREA
2
5
1. Move sensor ring over connection pipes.
2. Fix armature by socket key SW9 – use distance plate if
necessary.
3. Mount connection hoses.
4.
Install control box.
5. Insert dirt filters in corner valves. Mount T-parts at warm-
and cold water corner valves (acc. to diagram
20)
6. Mount T-part at mixing water pipe. Connect cold-, warm,
and mixed water pipes from the armature to the T-part.
3
6
SanTec VIVA / PUREA
Kitchen tap
EN
see page
T
21