Playing A Record; Procedure; Interrupting Playback - Dual DTJ 301.1 USB Bedienungsanleitung

Playing a record

Playing a record

Procedure

 Put a record on the turntable.
 Turn the On/Off switch 5 to the "ON" position.
 The LED display for the speed selection switch 10
(33 rpm) and the stroboscope lamp 4 light up.
Note:
Using the SPEED selector switches, select the speed at
which you want to play back the record.
 Remove the stylus protection if the pickup is
equipped with a removable one.
 Remove the clip 14.
 Press the start/stop button 6. The turntable 19 starts
turning.
 Lift the lift lever 13.
 Swing the tone arm (9) over the desired groove.
18
 Place the lift lever 13 downwards. The tone arm
lowers onto the record slowly and playback begins.
 After playback is finished, replace the tone arm on
the tone arm rest 14 and fasten it using the clip.
 Press the start/stop button 6.
 Put the on/off switch 5 in the "OFF" position after the
electronic brake has stopped the turntable.
Note:
The electronic brake does not work if the on/off switch is
switched off before the start/stop button is pressed.

Interrupting playback

 Place the lift lever 13 upwards.
This lifts the tone pick-up stylus off of the record.