Cameo G4 FC Bedienungsanleitung Seite 21

Status
= Set status LED
LED
Power = Operating mode
Factory
= Reset to factory settings
Reset
Factory Reset to factory settings except
=
Reset WC User Colors
SYSTEM INFORMATION (SysInformation)
Starting from the main display, press the encoder to enter the main menu . Select the menu item
SysInformation and confirm the selection.
This will take you to the submenu for accessing the system information (see table):
SysInformation
Firmware = Displays device firmware
Tempera- Displays temperature of
=
ture LED unit
Operation
= Displays operating time
Hours
Always On LED Permanently on
OFF LED off
LED is switched off after 30
Off after 30s
seconds
Constant brightness over long
Constant
periods
Maximum Maximum brightness
Resetting to factory settings:
Reset? Perform reset with ENTER,
cancel with MENU
Resetting to factory settings
apart from User Colors:
WC Reset?
Perform reset with ENTER,
cancel with MENU
Main CPU
V1.xx
LED TEMP xx °C / xx °F
Celsius (= display in degrees
Celsius)
Temperature
Unit
Fahrenheit (= display in degrees
Fahrenheit)
Display of the unit operating time in
xx:xx h
hours and minutes
21