Cameo G4 FC Bedienungsanleitung Seite 17

STATIC STANDALONE MODE
The Static standalone mode allows the Dimmer, Dimmer Fine, Strobe and RGBAL values to be set
directly on the device with values between 000 and 255, in a similar way to with a DMX controller.
In this way, an individual scene can be created without an additional DMX controller.
Select Stand Alone, confirm the selection, then select Static and confirm again. Now select the
menu item you wish to edit and confirm the selection. In the selected menu item, set the desired
value from 000 to 255 and confirm the entry. The values for the strobe effect correspond to the
values in channel 2 of the DMX table 3 CH presets.
STANDALONE MODE COLOR MACRO
15 different colour macros and 4 individual colours (User Color 1-4) are available as presets. The
brightness can be adjusted for each preset.
Select Stand Alone, confirm the selection, then select Color Macro and confirm again. Select
the desired colour preset and confirm (Color Off = blackout). The brightness of the selected preset
can now be adjusted from 000 to 100. Confirm all entries.
The individual colours User Color 1-4 are created in menu item Edit User Color in the Stand
Alone menu.
17