Grundig PartyHit Bedienungsanleitung Seite 26

BASIC PLAYBACK ______________________________
Top panel function operation
Press and hold for 3 seconds to switch on/off the unit.
8
Press to check battery level in power on state.
Press to temporarily pause a playback; press it again to resume the
playback.
Hold down to disconnect bluetooth connection in bluetooth connection
mode.
TWS Press to enter the Bluetooth mode.
Hold down to enter the TWS mode.
UBS Press to enter the UBS ON (white light flashes 2 times) sound effect
mode, press it again to enter the UBS OFF (yellow light flashes 2 times)
mode.
Press repeatedly to switch the different light mode of speaker light.
Press to skip to the next track.
Press to return to the previous track.
Turn the VOL knob to adjust master volume level.
MIC - Press to decrease the microphone volume.
MIC + Press to increase the microphone volume.
Microphone playback
• Insert one microphone into the microphone socket on the rear panel and adjust to
a low level press the microphone volume button on the top panel.
• Adjust the microphone volume level to your desired level press the microphone
volume button on the top panel. Now ,enjoy the karaoke singing!
Charging operation
Use the AC power cord (included) to connect AC power input socket on the unit to
AC power outlet. the current charging-indicator on the unit will flash during charging,
when four charging-indicator on the unit keep solid light that the battery has been
fully charged.
4 LED white light up=approx. 81%-100% full
3 LED white light up=approx. 51%-80% full
2 LED white light up=approx. 21%-50% full
1 LED white light up=approx.11%-20% full
(indicating charging is needed)
26 ENGLISH