Setting A Programme - Electrolux WTGL4E200 Benutzerinformation

18 www.electrolux.com
êompartment for washing phase.
êompartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
Always obey the instructions
that you find on the
packaging of the detergent
products.
10.3 êheck the position of the
flap
1. Pull out the detergent dispenser until it
stops.
2. Press the lever down to remove the
dispenser.
3. To use powder detergent, turn the flap
up.
4. To use liquid detergent, turn the flap
down.
1
A
B
With the flap in the
position DOWN:
• Do not use gelatinous
• Do not put more liquid
• Do not set the
• Do not set the delay
5. Measure out the detergent and the
fabric conditioner.
2
6. êarefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
10.4 Activating the appliance
1. Open the water tap.
2. êonnect the mains plug to the mains
socket.
3. Press button Ein/Aus - Marche/Arr t
to activate the appliance.
A short tune sounds.

10.5 Setting a programme

1. Turn the programme knob and set the
programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause -
D part/Pause flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
or thick liquid
detergents.
detergent than the
limit showed in the
flap.
prewash phase.
start function.