Mounting Place; Mounting; Mounting And Operation - Westfalia 96 11 28 Bedienungsanleitung

Mounting Place

The transmission range of the lantern to other transmitter is approx. 70 m
in free field without disturbances and direct visual contact. Please keep in
mind that the transmission range will be reduced by obstacles such as
walls made of concrete or other radio controlled devices. Do not mount the
lantern close to metallic objects.
Before firmly mounting the lantern, make sure the transmission signal can
be emitted. If interferences occur or there is no transmission, select
another place for the lantern or the transmitter.

Mounting

Mount the lantern only vertically, as shown
in the figure.
Mount the lantern on a solid surface,
preferably 1.8 – 2.4 m above the ground or
under eaves of the house.
Make sure that power mains is voltage-free
when connecting the wiring!
1. For convenient handling when mounting the
lantern on the wall, allow a second person to
assist you or unscrew the glass housing by
removing the mounting screws (4).
2. For mounting the rear cover on the wall, use
suitable screws and dowels.
3. Unscrew both fixing screws (11) and remove
the rear cover (9) from the lantern.
4. Penetrate the seal (12) and insert the
wiring through the opening.
5. Mount the rear cover on the wall by
using screws and dowels. Make sure
the mounting screws (10) are inserted
into the spacers prior to screw the
cover on the wall.

Mounting and Operation

12
Seal
Rar Cover