Inhaltsverzeichnis
Werbung
Programmierung der OPC UA-Client-Bausteine
5.10 Fehlernummern
Done Error
ErrorID (hex) Name
0
1
807C0000
0
1
80BF0000
0
1
807D0000
0
1
807E0000
0
1
807F0000
0
1
80800000
0
1
80810000
0
1
80820000
0
1
80830000
0
1
80840000
0
1
80850000
0
1
80860000
0
1
80870000
0
1
80880000
0
1
80890000
0
1
808A0000
0
1
808B0000
0
1
808C0000
0
1
808D0000
0
1
808E0000
0
1
80970000
0
1
80980000
0
1
80990000
0
1
809A0000
0
1
809B0000
0
1
809D0000
0
1
809E0000
0
1
809F0000
0
1
80A00000
116
BadInsufficientClientProfile
BadStateNotActive
BadTcpServerTooBusy
BadTcpMessageTypeInvalid
BadTcpSecureChannel
Unknown
BadTcpMessageTooLarge
BadTcpNotEnough
Resources
BadTcpInternalError
BadTcpEndpointUrlInvalid
BadRequestInterrupted
BadRequestTimeout
BadSecureChannelClosed
BadSecureChannelToken
Unknown
BadSequenceNumberInvalid The sequence number is not valid.
BadConfigurationError
BadNotConnected
BadDeviceFailure
BadSensorFailure
BadOutOfService
BadDeadbandFilterInvalid
BadRefreshInProgress
BadConditionAlrea-
dyDisabled
BadConditionDisabled
BadEventIdUnknown
BadNoData
BadDataLost
BadDataUnavailable
BadEntryExists
BadNoEntryExists
Bedeutung
The Client of the current Session does not support one or
more Profiles that are necessary for the Subscription.
The sub-state machine is not currently active.
The server cannot process the request because it is too busy.
The type of the message specified in the header invalid.
The SecureChannelId and/or TokenId are not currently in
use.
The size of the message specified in the header is too large.
There are not enough resources to process the request.
An internal error occurred.
The Server does not recognize the QueryString specified.
The request could not be sent because of a network interrup-
tion.
Timeout occurred while processing the request.
The secure channel has been closed.
The token has expired or is not recognized.
There is a problem with the configuration that affects the
usefulness of the value.
The variable should receive its value from another variable,
but has never been configured to do so.
There has been a failure in the device/data source that gen-
erates the value that has affected the value.
There has been a failure in the sensor from which the value is
derived by the device/data source.
The source of the data is not operational.
The dead band filter is not valid.
This Condition refresh failed, a Condition refresh operation is
already in progress.
This condition has already been disabled.
Property not available, this condition is disabled.
The specified event id is not recognized.
No data exists for the requested time range or event filter.
Data is missing due to collection started/stopped/lost.
Expected data is unavailable for the requested time range
due to an unmounted volume an off-line archive or tape or
similar reason for temporary unavailability.
The data or event was not successfully inserted because a
matching entry exists.
The data or event was not successfully updated because no
matching entry exists.
Betriebsanleitung, 01/2017, C79000-G8900-C427-02
CP 443-1 OPC UA
Werbung
Inhaltsverzeichnis
