Changing The Sanding Pad; Using The Spade - Westfalia TD8501 Bedienungsanleitung

Do not use additional pressure on the machine while working. The machine's
own weight develops sufficient pressure for sanding. Additional pressure does
not increase the sanding rate and excessive pressure will overheat the ma-
chine.
Changing the Sanding Paper Pad
The multi tool pad holder is equipped with a hook-and-loop system, so the
sanding paper pads can be quickly changed. Always switch off the machine and
pull off the sanding paper pad. Place the new sanding pad and continue working.

Using the Spade

With the included spade now you have no longer
to work laboriously with your hand scraper. Strip
stubborn residues off tiles, plaster stone, flooring
and other surfaces.
1. For using the spade, first remove the dust
extraction adaptor (15).
2. Insert the dust protection rubber caps into the
openings. This is very important, so dust and
dirt cannot enter into the machine.
3. Place the spade on the tool holder and
observe the 4 openings on the spade. These
openings have to fit exactly on the tool holder
of the machine. You can place the spade
straight or displace up to 90° to the left or to
the right, according to the desired working
direction.
Operation
14