P
REPARATORY WORK
Winding thread on to the bobbin
You can use the sewing machine to wind thread on to the bobbins
easily.
To do so, take the thread from the cotton reel through the thread
guide to the bobbin.
The exact procedure for winding thread on to the bobbin is descri-
bed in the following points:
• Set the switch in the hand wheel (10) to the bobbin symbol to
prevent the needle from moving while you wind thread on to
the bobbin.
• Pull one of the cotton reel holders (7) completely out and place
a cotton reel on it..
• Now guide the thread from the cotton reel through the thread
guide as illustrated.
• Put the end of the thread through the bobbin hole as illustrated
and wind the thread around the bobbin a few times by hand.
EN
EN-9