Medion MD 11836 Bedienungsanleitung Seite 100

• Now pass the thread through the upper thread guide (3) as illu-
strated.
TIP
An upper thread tension of 3 is ideal for most applications.
• Pass the thread under the front thread guide and upwards,
which automatically pushes up the inner guide spring.
• Then insert the thread from right to left into the hook of the
thread take-up (1).
NOTE
If necessary, turn the hand wheel (10) to raise the thread take-up.
• Now guide the thread down towards the needle. It is thus chan-
nelled through the internal thread guide and thread guide of the
needle holder.
• Now pass the thread through the eye of the needle from the
front to the back and leave a thread end of around 10 cm.
EN
EN-13